Veilige betaling
Via iDeal, bankoverschrijving
of pinnen/contant bij ophalen
Grote voorraad
Ruim 1200 connectoren
en 7000Mtr coaxkabels
100% verzekerd
Dubbel verpakt en
verzekerd per PostNL
LDG AT-600 PRO-2

The AT-600ProII will handle up to 600 watts SSB and CW and 300 on RTTY (1.8 – 30 MHz) and 250 watts on 54 MHz.

Lees meer..

Beschikbaarheid: Op voorraad. Nog 1 exemplaar beschikbaar.

Normale prijs: € 409,00

Nu

Special Price € 399,00

Time was, 100 watts was a lot of power. Today, more and more mid-sized amps with 500 watts output are becoming popular. The LDG AT-600ProII is designed for this new generation of power levels.

The AT-600ProII will handle up to 600 watts SSB and CW and 300 on RTTY (1.8 – 30 MHz) and 250 watts on 54 MHz. It features LDG’s state-of-the-art, processor-controlled Switched-L tuner. It will match virtually any kind of coax-fed antenna, including Yagis, dipoles, inverted Vs, slopers, loops, just about anything. It will typically match a 10:1 SWR down to 1.5:1 in just a few seconds. You can also use the AT-600ProII with longwires, random wires and antennas fed with ladder line just by adding a balun.

The AT-600ProII features two antenna ports with a front-panel indicator showing which is in use, and separate memory banks for each antenna. The optional M-600 4.5" analog meter shows FWD (100 and 600W scales), REV, or SWR in Peak or Average. Easy to read LED bar-graph meters showing RF power, SWR and tuner status, tactile feedback control buttons and an LED bypass indicator complete the user interface. Any power source from 11 – 16 volts DC can be used; the AT-600ProII only draws up to 750mA.

 

•   600 Watts SSB and CW, 250 watts on 6M. 250 watts PSK and digital.
•   Easy to read LED bar graph display for RF power, SWR and status.
•   Optional M-600 4.5 inch analog meter.
•   4,000 memories for instantaneous band changing.
•   Two position antenna switch with memories for each position.
•   Tuning time: 0.5 to 6 seconds full tune, 0.1 second memory tune.
•   Built in frequency counter for memory operation.
•   Frequency coverage: 1.8 to 54.0 MHz.
•   Tunes 6 to 800 ohm loads (16 to 150 ohms on 6M).
•   For Dipoles, Verticals, Vs, Beams or and Coax Fed Antenna.
•   Includes DC power cable.
•   Power requirements: 11 to 16 volts DC at 750 mA max during tuning. www.Jameco.com WM1012-760 and 1953663 are compatible power supplies.
•   Enclosure: 10.5D x 8.5W x 2.5H inches.
•   Weight: 3 pounds.
•   In the box: Tuner, manual, powercable 12v, (no coax cable).

Schrijf uw eigen review
  1 ster 2 sterren 3 sterren 4 sterren 5 sterren
Ons
Product